Manage Wi-Fi Network Overload

We love our smart-home devices, and it’s easy to overload our Wi-Fi networks with them. When that happens, our network traffic can slow to a crawl – just like we see at our Hudson River crossings. It’s easier and faster to clear up your network traffic jams.

Just as roads have a capacity, your Wi-Fi network can only handle a specific volume of traffic, which means it can handle only so many devices before performance backs up. We don’t think much about it as we add all sorts of smart devices in our homes, such as smart speakers, cameras, lighting, HVAC controls and some appliances. They’re all in addition to computers, TVs, and all our mobile devices. In most cases, the problems creep up on us gradually until we notice not everything is working at their expected speeds. Sometimes, we’ll see a lot of buffering while streaming 4K video or gaming, and those problems grab our attention.

To clear up network traffic jams, you can start with some easy steps. First, make sure all dongles and power cords have solid connections. That could solve a problem with one or a few devices. The next step is to restart your router. Unplug it from the electric outlet, and if you have a power on/off switch, hold it in for 30 seconds. That will help clear out the electronic junk that can accumulate in any device. While you’re at it, you should also check for firmware updates for your router and install any that are available.

Another easy step is to make sure your router has plenty of room around it. If it’s in the middle of clutter or too close to a wall, moving it or cleaning up the surrounding area can help.

If you still don’t get the performance you want, you can take a couple of technical measures. The first is managing the traffic on the router’s frequency bands. Most routers are dual-band routers, which means they run both the 2.4 GHz and 5.0 GHz bands. In an ideal setup, the 2.4 band carries signals for smart speakers, light switches, door locks, garage door openers, and security cameras – to name a few. Those devices usually have default settings for that band. Computers, TVs, tablets, and other devices used for streaming and gaming are suited for the 5.0 band, which is faster and more robust for shorter distances.

There are a number of apps – including those from Apple (Siri), Amazon (Alexa), Google, and others – that can tell what devices are connected to your Wi-Fi network. Some apps allow you to assign some devices to one band or the other and even let you assign devices to specific channels in each band. The apps also enable you to disconnect devices from your network, and this alone might be enough to restore some speed to your network.

If none of these steps gives you the performance you want, you can consider getting a new router and/or adding a mesh network. Electronic components do wear out, and older routers may lack the technology needed to handle the growing demands on your network. A mesh network is essentially a system of smart repeaters that work in combination with your router to extend and manage network traffic to optimize performance for connected devices. Like routers, newer generations of mesh networks are built to handle more network traffic, and if you have an older one, it may not be able to keep up with your technology needs.

If the simple DIY suggestions in this article don’t give you the network performance you want, we can help you with more extensive analyses and solutions, including setting up a network management app and selecting and installing a router, mesh network, or both. Call us – 973-433-6676 – or email us to discuss your needs.

Security Not Top-of-Mind at CES

It’s fair to say I was disappointed when talking to IoT device manufacturers at CES in Las Vegas last month. Security was not the big thing on their minds. And except for a TV screen that you can roll up like paper (which I couldn’t see at the show), there wasn’t anything I wanted to bring home and install.

The lack of emphasis on security was baffling, especially when you consider that a lot of companies at CES were talking about AI (artificial intelligence) and 5G networks. The latter are the newer, faster wireless data networks that will play an important role, along with AI, in the next generation of the IoT, especially autonomous vehicles (AVs), which are expected to be an established mode of transportation in the next 10 years. We’re simply going to require more data at a faster speed to make AVs work.

However, it seems that AI – and maybe 5G – was more concerned with what we’ll be running to the store to buy instead of how we’ll get there. Samsung, which makes refrigerators, among other appliances, started to show off Bigsby, its version of Alexa. And when you combine it with a smart refrigerator, this new power team can create a shopping list for you. You can even use voice commands for your washing machine. OK…

There is still a big push to get more devices into the home, and we certainly have more than our share in ours. We find the ones we have to be either great conveniences or highly useful. We just wish that the manufacturers were paying more attention to security, especially with hacking and information theft so prevalent. However, nothing stood out like that TV that rolls up. I really would have liked to be able to see it, even if I couldn’t buy it.

On the other hand, one of the more ridiculous things I saw was either a blanket or mattress pad with dual temperature control and a discounted price of $2,000. Sony also had a Walkman that weighed 5 pounds and had a heftier price tag: $2,500. Sony said there’s a market for it: audiophiles who want high-quality sound.

Speaking of sound, I took note of Panasonic’s automotive offerings, though none was available for consumer purchase. Rather, it seems that the automotive manufacturers are going to rely more on electronics manufacturers and the mobile operating systems to provide the devices and infrastructure for in-car infotainment systems. As part of that trend, we note that Toyota is dropping its plan to introduce a proprietary infotainment system.

We applaud Toyota’s decision for three reasons:

  1. In-car systems from the automakers don’t work well.
  2. Each in-car system has its own way of displaying and using information, and that can be confusing for people who drive multiple cars, including rental cars, where roads and a car’s system are unfamiliar.
  3. Because they are built into the car, it’s difficult to update them in a timely manner.

Just about all manufacturers offer connectivity to either Apple or Android in-car systems – or both – throughout their product lines. Our devices are already customized for driving directions and play lists, and we know how to use them. We also can make our devices secure in the same way we update our OS and applications on our computers.

I think some exciting new products and changes in the way we use technology are a year or two away, but that doesn’t mean we should sit on our hands. If you need a new IoT product now, we can help you we can help you select and install one for today – and make sure it’s secure – and see how it could fit your future needs. Call us – 973-433-6676 – or email us to talk about it.