- 10
- Sep 2024
Manage Wi-Fi Network Overload
We love our smart-home devices, and it’s easy to overload our Wi-Fi networks with them. When that happens, our network traffic can slow to a crawl – just like we see at our Hudson River crossings. It’s easier and faster to clear up your network traffic jams.
Just as roads have a capacity, your Wi-Fi network can only handle a specific volume of traffic, which means it can handle only so many devices before performance backs up. We don’t think much about it as we add all sorts of smart devices in our homes, such as smart speakers, cameras, lighting, HVAC controls and some appliances. They’re all in addition to computers, TVs, and all our mobile devices. In most cases, the problems creep up on us gradually until we notice not everything is working at their expected speeds. Sometimes, we’ll see a lot of buffering while streaming 4K video or gaming, and those problems grab our attention.
To clear up network traffic jams, you can start with some easy steps. First, make sure all dongles and power cords have solid connections. That could solve a problem with one or a few devices. The next step is to restart your router. Unplug it from the electric outlet, and if you have a power on/off switch, hold it in for 30 seconds. That will help clear out the electronic junk that can accumulate in any device. While you’re at it, you should also check for firmware updates for your router and install any that are available.
Another easy step is to make sure your router has plenty of room around it. If it’s in the middle of clutter or too close to a wall, moving it or cleaning up the surrounding area can help.
If you still don’t get the performance you want, you can take a couple of technical measures. The first is managing the traffic on the router’s frequency bands. Most routers are dual-band routers, which means they run both the 2.4 GHz and 5.0 GHz bands. In an ideal setup, the 2.4 band carries signals for smart speakers, light switches, door locks, garage door openers, and security cameras – to name a few. Those devices usually have default settings for that band. Computers, TVs, tablets, and other devices used for streaming and gaming are suited for the 5.0 band, which is faster and more robust for shorter distances.
There are a number of apps – including those from Apple (Siri), Amazon (Alexa), Google, and others – that can tell what devices are connected to your Wi-Fi network. Some apps allow you to assign some devices to one band or the other and even let you assign devices to specific channels in each band. The apps also enable you to disconnect devices from your network, and this alone might be enough to restore some speed to your network.
If none of these steps gives you the performance you want, you can consider getting a new router and/or adding a mesh network. Electronic components do wear out, and older routers may lack the technology needed to handle the growing demands on your network. A mesh network is essentially a system of smart repeaters that work in combination with your router to extend and manage network traffic to optimize performance for connected devices. Like routers, newer generations of mesh networks are built to handle more network traffic, and if you have an older one, it may not be able to keep up with your technology needs.
If the simple DIY suggestions in this article don’t give you the network performance you want, we can help you with more extensive analyses and solutions, including setting up a network management app and selecting and installing a router, mesh network, or both. Call us – 973-433-6676 – or email us to discuss your needs.
Categories
Comments
Recent Posts
Recent Comments
- D. J. Hawkins on Health Wearables in Style at CES
- Allan Berger on Tech Preps for Trips
- Stan Schnitzer on We’re Not Neutral on Net Neutrality
- Allan Berger on Equifax and Protecting Your Identity
- Michael L. on Brave New Wireless World
Archives
- October 2024
- September 2024
- July 2024
- June 2024
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- October 2023
- September 2023
- August 2023
- July 2023
- June 2023
- May 2023
- April 2023
- March 2023
- February 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- June 2022
- May 2022
- April 2022
- February 2022
- January 2022
- December 2021
- November 2021
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- February 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- July 2017
- June 2017
- May 2017
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012