We love our smart-home devices, and it’s easy to overload our Wi-Fi networks with them. When that happens, our network traffic can slow to a crawl – just like we see at our Hudson River crossings. It’s easier and faster to clear up your network traffic jams.

Just as roads have a capacity, your Wi-Fi network can only handle a specific volume of traffic, which means it can handle only so many devices before performance backs up. We don’t think much about it as we add all sorts of smart devices in our homes, such as smart speakers, cameras, lighting, HVAC controls and some appliances. They’re all in addition to computers, TVs, and all our mobile devices. In most cases, the problems creep up on us gradually until we notice not everything is working at their expected speeds. Sometimes, we’ll see a lot of buffering while streaming 4K video or gaming, and those problems grab our attention.

To clear up network traffic jams, you can start with some easy steps. First, make sure all dongles and power cords have solid connections. That could solve a problem with one or a few devices. The next step is to restart your router. Unplug it from the electric outlet, and if you have a power on/off switch, hold it in for 30 seconds. That will help clear out the electronic junk that can accumulate in any device. While you’re at it, you should also check for firmware updates for your router and install any that are available.

Another easy step is to make sure your router has plenty of room around it. If it’s in the middle of clutter or too close to a wall, moving it or cleaning up the surrounding area can help.

If you still don’t get the performance you want, you can take a couple of technical measures. The first is managing the traffic on the router’s frequency bands. Most routers are dual-band routers, which means they run both the 2.4 GHz and 5.0 GHz bands. In an ideal setup, the 2.4 band carries signals for smart speakers, light switches, door locks, garage door openers, and security cameras – to name a few. Those devices usually have default settings for that band. Computers, TVs, tablets, and other devices used for streaming and gaming are suited for the 5.0 band, which is faster and more robust for shorter distances.

There are a number of apps – including those from Apple (Siri), Amazon (Alexa), Google, and others – that can tell what devices are connected to your Wi-Fi network. Some apps allow you to assign some devices to one band or the other and even let you assign devices to specific channels in each band. The apps also enable you to disconnect devices from your network, and this alone might be enough to restore some speed to your network.

If none of these steps gives you the performance you want, you can consider getting a new router and/or adding a mesh network. Electronic components do wear out, and older routers may lack the technology needed to handle the growing demands on your network. A mesh network is essentially a system of smart repeaters that work in combination with your router to extend and manage network traffic to optimize performance for connected devices. Like routers, newer generations of mesh networks are built to handle more network traffic, and if you have an older one, it may not be able to keep up with your technology needs.

If the simple DIY suggestions in this article don’t give you the network performance you want, we can help you with more extensive analyses and solutions, including setting up a network management app and selecting and installing a router, mesh network, or both. Call us – 973-433-6676 – or email us to discuss your needs.